FREE Shipping on All Orders 626.363.8822
Universal Motorcycle Bar End Mirrors

Universal Motorcycle Bar End Mirrors

review
(15 Reviews) | Write a Review
4
$15.74
In Stock.

Description

  • High quality 6061 Billet Aluminum light weight Bar End Mirrors (Left & Right Sides)
  • Mirror (glass) Spec: 3 inches diameter convex glass
  • Fits all standard 7/8 inch mirrors with internal clamping system, allows installation into the bar ends or clamp directly to most bar ends.
  • Easy to Install. No additional parts are required
  • Material: Billet Aluminum
  • Color: Black
  • Fitment:
  • All Honda, Kawasaki, Suzuki Yamaha Motorcycle with 7/8 inches diameter bars or clamp around most standard bar ends
  • Quantity: 1 pair
  • Reviews

    1 Stars
    bad product?
    install was easy, the view i gained was good, problem tho, when you buy two mirrors and in less than a week only have 1 mirror that kind of defeats the purpose of a "set" the mirror i installed on the left side the arm that holds the mirror has two screws that hold the round part in place had became extremely loose so i inspected the item to see about tightening it up only to find that to access the two screws you would have to remove the "glass" to get behind it to tighten them up so i got out the hair drier to warm it so the glue would loosen up and pop it out to tighten the two screws well it went fine only as the mirror cooled it decided to crack into 6 pieces... yay 1 mirror design flaw for sure something to think about before purchasing.
    Reviewed by:  from missouri. on 6/12/2015
    1/5
    5 Stars
    Good mirrors
    I wanted to get rid of the stock mirrors on by Buell so I ordered these. As long as you work carefully, the install is trouble free. I used a hammer on my concrete floor it tap the swell nuts so I could just fit inside the handlebars and then sinched them up a little more. They stay in place and don't shake.
    Reviewed by:  from Virginia. on 6/8/2015
    5/5
    5 Stars
    Mirrors
    They work great! You would think they are more expensive but I'm not complaining. They have an adapter on them to fit 7/8" bars and they fit snug. There is no vibration AT ALL. Just make sure to keep your throttle one out a little bit so that it doesn't make your throttle stick. Awesome product!
    Reviewed by:  from Twin Lake, WI. on 6/1/2015
    5/5
    4 Stars
    None
    I hate the "bug antenna" looking mirrors on vintage Hondas and wanted to try some bar end mirrors but they are expensive. Spending a bunch of money and then deciding I didn't like them was not an option. I saw these on a Google search and my first thought was, what do you get for $15? I don't like cheap things. You should buy as much quality as you can afford. But like I said, spending a couple hundred bucks on a set of mirrors and then deciding I didn't like them was not an option. It made sense to buy some cheaper ones, try them out, and if I like the location, function, etc... I could spend more later if I wanted to. The free postage/shipping did the trick. I ordered a pair a week ago Monday. The order process was easy, I got an email the following day saying the order had shipped, and on Friday I got them in the mail. (Thanks D2Motot) Out of the box the mirror quality looked pretty decent. They feel substantial, not light and cheap. The mirror clarity is pretty good. There is a slight convex shape so you get a fairly wide field of view. Overall, the out of the box feel was good. There was one problem with the quality from the start. One of the longer anchoring bolts was improperly formed and lacked the hex head for the allen wrench. Instead of a proper hex shape, it was a round hole. I couldn't use the bolt. I installed one mirror on the throttle side on Friday evening. It was a bit tricky to install; not because it was a technical challenge, but because of the design. Here's an important note. The expansion sleeves (there are two per mirror) have slots in them allowing them to expand to tighten against the inside of the handle bars. If you don't align the slots on each sleeve with each other, they won't expand properly and you won't be able to tighten them completely. I got the throttle side installed on Friday but couldn't ride right away. When I did ride, the mirror performed very well. A quick trip to Ace Hardware and I returned home with a stainless steel replacement bolt for $1.60. It is a M8 metric bolt with 1.25 thread. It took a few minutes on Sunday to install the clutch side and I had a matching pair. Took the bike out for a nice 50 mile jaunt through the countryside. Both mirrors performed well, maintained their positions. Pros: Inexpensive, free shipping, decent mirror quality, look pretty good, don't vibrate, hold their position. Cons: Cheap hardware, clunky installation. Four stars. *USE LOCKTITE ON THE BOLTS*
    Reviewed by:  from Greer, SC. on 5/18/2015
    4/5
    5 Stars
    good quality
    At fifteen dollars i didn't expect much, but the quality is superb. Fit easily and fast shipping. Impressed is an understatement.
    Reviewed by:  from California . on 5/2/2015
    5/5
    5 Stars
    biker
    I really like these.. they are very clear, very little vibration. amazing mirrors for the price. I do think the company should send extra installation pieces because if you ruin one theres no fixing it and you cannot find these pieces at any hardware store.
    Reviewed by:  from Moses Lake. on 4/19/2015
    5/5
    5 Stars
    drummer
    Great mirrors, good quality and a very fair price.
    Reviewed by:  from fort atkinson, wi. on 4/7/2015
    5/5
    5 Stars
    Mech Eng
    Remarkably nice product. Incredibly low price for a top quality item. Make sure you lubricate the threads with greae, so they make up tight and can be adjusted later. Clamp over the bar end, or stab into the open end. Either way works great.
    Reviewed by:  from La. on 3/3/2015
    5/5
    5 Stars
    Retired
    Use them on my Quad & my bike. Best mirrors ever. they do not vibrate, & they are very clear.
    Reviewed by:  from Canada. on 2/22/2015
    5/5
    5 Stars
    Great quality and value
    I was surprised how nice this product was for how cheap it is. I really expected it to be a throw away I could use for a little while, but it is well-built. Shipped quickly, the price is right, and its surprisingly quality.
    Reviewed by:  from austin.pfeiffer@gmail.com. on 1/16/2015
    5/5
    5 Stars
    beautiful simplicity
    Fit up perfectly and with two test runs under the belt, I feel these mirrors are exactly what I needed. Understated design at a low price, yet allows me to see what's going on behind me better than the clunky handlebar mounted mirrors my bike came with. Happy, happy, happy.
    Reviewed by:  from Milwaukee. on 12/20/2014
    5/5
    5 Stars
    Mr.
    I was at the bike shop looking for mirror options on my 06 GSXR 750 (as the stock mirrors look terrible) when I found some bar end mirrors identical or very very similar to these. Turns out they were $86 a piece!! $172 for both!! D2MOTO's Bar end mirrors were easy to install, look great, & provide an exceptional view of the road behind you.
    Reviewed by:  from Fayetteville AR. on 10/27/2014
    5/5
    5 Stars
    Love 'em
    these mirrors are exactly as I expected them to be. they were shipping quickly and I am pleased with the seller and the way they conduct business
    Reviewed by:  from Utah. on 10/14/2014
    5/5
    5 Stars
    Excellent bar end mirrors
    Good mirror, fit perfectly on my R1
    Reviewed by:  from CA. on 9/15/2014
    5/5
    2 Stars
    hmmm
    Good mirror but very poor hardware. I had to go get new bolts for them to even work. But can't beat it for the price.
    Reviewed by:  from Arizona. on 9/3/2014
    2/5